This device is designed for the film application needs of sheet shaped incoming materials. Compared to the independent feeding Feida, the film application speed will be faster. It adopts three camera positioning technology, and the film and shell materials are visually imaged separately, which can achieve higher accuracy in film application.
Main technical indicators:
1. Film application accuracy: ± 0.1mm
2. Film size: 10 * 10~380 * 180mm
3. Capacity: 1800~3000PCS/H (depending on the number of sheets of single row membrane material)
4. Product placement method: manual or automatic feeding with vibrating disc (customized)
5. Membrane feeding method: transparent film stacking automatic feeding
6. Discharge method: Flow out from the assembly line
7. Product size range (length * width * height): 10 * 10 * 3~380 * 180 * 40mm
8. Machine dimensions (length * width * height): 1576 * 975 * 1905mm
Working environment conditions:
1. Power supply: 220VAC ± 5% 50Hz
2. Power: 1000W
3. Compressed air: ≥ 0 5Mpa
4. Gas consumption: 30L/min
Feed direction
Film material specifications and related requirements:
1. The distance between the feeding direction membranes is required to be equidistant
2. The dimensional error in the feeding direction A of each membrane is less than 2mm
3. The thickness of the backing paper is greater than 0 1 rrm, it is recommended to prioritize the use of plastic backing paper
4. The bottom paper outer frame requires neat cutting on all four sides (regular rectangle, no obvious trapezoid, parallelogram)
Application areas: digital tubes, electrical control panels, product windows, remote controls, die-cutting composites, etc
